Cisco 7010 Configuration Notes

• Route Processor (RP) Installation and Configuration
  

• RSP7000 Installation and Configuration
  

• RSP7000 Chassis Interface (RSP7000CI) Rplcmt. Instruc.
  

• Installing the RSP7000 Upgrade Kit
  

• Switch Processor (SP) Installation and Configuration
  

• Silicon Switch Processor (SSP) Installation and Configuration
  

• Upgrading Software/Microcode in Cisco 7000/7500 Series Routers
  

• ATM Interface Processor (AIP) Installation and Configuration
  

• Channel Interface Processor (CIP) Install. and Config.
  

• Second-Generation Channel Interface Processor (CIP2) Install.
  

• Upgrading DRAM on the CIP2
  

• Ethernet Interface Processor (EIP) Install. and Config.
  

• Fast Ethernet Interface Processor (FEIP) Install and Config
  

• FDDI Interface Processor (FIP) Install. and Config.
  

• Fast Serial Interface Processor (FSIP) Install. and Config.
  

• FSIP E1-G.703/G.704 Port Adapter Install. and Config.
  

• HSSI Interface Processor (HIP) Install. and Config.
  

• MultiChannel Interface Processor (MIP) Install. and Config.
  

• Token Ring Interface Processor (TRIP) Install. and Config.
  

• Flash Memory Card Installation Instructions
  

• Cisco 7505/7010 Rack-Mount and Cable Mgmt. Kit Installation
  

• RMA Return Instructions
  

• Installing Jackscrews on the EIP Ethernet Connectors
  

• Arbiter Replacement Instructions
  

• CIP Microcode Release Note and Upgrade for 11.1
  

• Cisco 7010 and Cisco 7505 Chassis Replacement Instructions
  

• 600W, AC-Input Power Supply and Fan Tray Replace. Instruc.
  

• 600W, DC-Input Power Supply Replacement Instructions
  

Copyright 1988-1996 © Cisco Systems Inc.