AGS+ Configuration Notes and Microcode Release Notes

• Installing the SCS-MT Enhanced Memory Card
  

• Installing the Nonvolatile Memory Card Applique
  

• Installing and Configuring the Hardware Type 1.1 CSC-MCI
  

• Installing and Upgrading the CSC/3 Processor Card
  

• Installing and Upgrading the CSC/4 Processor Card
  

• Installing and Configuring the CSC-CCTL ciscoBus Contr. Card
  

• Installing and Configuring the MEC and C2MEC Enet Contr. Cards
  

• Upgrading MCI Cards from Microcode Versions 1.5-1.10
  

• Installing and Configuring the CSC-R16M TR Interface Card
  

• Installing the CSC-FCI and C2FCI Cards and Appliques
  

• Installing the CSC-FCI and CSC-C2FCI FDDI Cards and Appliques
  

• Installing the (C2)HSCI Complex
  

• Upgrading the CSC-R16M Microcode to Version 3.4
  

• Upgrading Fiber Distributed Data Interface Cards to Microcode Ve
  

• Installing the 10BaseT Ethernet Transceiver Applique
  

• Installing the X.21 Dual-Mode Serial Applique
  

• ciscoBus Token Ring Card and Applique Installation and Upgrade I
  

• Installing and Upgrading the CSC-CCTL2 Card
  

• Installing and Configuring the CSC-MC+ Flash Card
  

• Installing and Configuring the Environmental Monitor Card in the
  

• Installing and Configuring the Dual-Port Token Ring Interface Ca
  

• Installing and Configuring the Single-Port Token Ring Interface
  

• Installing the High-Density V.35 Applique and Interface Cable
  

• Installing the High-Density V.35 NRZI Applique and Interface Cab
  

• Installing the RS-232, RS-232 NRZI (SDLC), and RS-449 Synchronou
  

• Upgrading MEC and C2MEC Type 5.1 Cards to Microcode Version 2.4
  

• Installing the G.703 Applique
  

• Replacing the MAS-10 Blower
  

• Installing and Upgrading the CSC-C2FCIT FDDI Card and Appliques
  

• Upgrading CSC-HSCI Cards to Microcode Version 1.2 or 10.1
  

• Upgrading the Microcode EPROM on the CSC1R and CSC2R
  

• Upgrading CSC-CCTL Card from uCode 1.0 and 2.0 to uCode 3.0
  

• Configuring and Replacing the 400 Watt Power Supply in the AGS+
  

• SCI ucode 1.4
  

• Upgrading the Serial Port Communications Interface (SCI) Card to
  

• Serial Port Communications Interface (SCI)
  

• Microcode Release Note
  

• Installing and Upgrading the CSC-CCTL2 CiscoBus II Card
  

Copyright 1988-1996 © Cisco Systems Inc.