M and C Chassis Configuration Notes and Microcode Release Notes

• Installing the SCS-MT Enhanced Memory Card
  

• Installing the Nonvolatile Memory Card Applique
  

• Installing and Configuring the Hardware Type 1.1 CSC-MCI
  

• Installing and Upgrading the CSC/3 Processor Card
  

• Installing and Upgrading the CSC/4 Processor Card
  

• Upgrading MCI Cards from Microcode Versions 1.5-1.10
  

• Installing and Configuring the CSC-R16M TR Interface Card
  

• Upgrading the CSC-R16M Microcode to Version 3.4
  

• Installing the 10BaseT Ethernet Transceiver Applique
  

• Installing the X.21 Dual-Mode Serial Applique
  

• Installing and Configuring the CSC-MC+ Flash Card
  

• Installing and Configuring the Dual-Port Token Ring Interface Ca
  

• Installing and Configuring the Single-Port Token Ring Interface
  

• Installing the High-Density V.35 Applique and Interface Cable
  

• Installing the RS-232, RS-232 NRZI (SDLC), and RS-449 Synchronou
  

• Installing the G.703 Applique
  

• Upgrading the MAS-23 Power Supply to the MAS-28
  

• Installing the MAS-28 Power Supply
  

• Upgrading the MAS-21 Power Supply to the MAS-28
  

• Replacing the MAS-20 Muffin Fan
  

• Installing the MAS-26 Power Supply in the M Chassis
  

• Installing the Slide Mount Kit on the M Chassis
  

• Replacing the Multibus Backplane in the M and C Chassis
  

• SCI ucode 1.4
  

• Upgrading the Serial Port Communications Interface (SCI) Card to
  

• Serial Port Communications Interface (SCI)
  

• Microcode Release Note
  

• Installing and Upgrading the CSC-CCTL2 Card
  

Copyright 1988-1996 © Cisco Systems Inc.