Table of Contents

ClickStart for Configuring Cisco 1602 for a Switched 56-kbps Network

Configuring the Router

ClickStart for Configuring Cisco 1602 for a Switched 56-kbps Network

Using ClickStar, you can configure a Cisco 1602 router with a serial line over a Switched 56-kbps network. so you can connect a small office or home PC to the Internet or another network.

Configuring the Router

To configure a Cisco 1602 router for a seral connection, follow these links:

• Understand How ClickStart Works.
  

• Click on the platform you are using (Windows 3.11 PC, Windows 95 PC, UNIX workstation, or Macintosh).
  

• Set Up the Router.
  

• Configure the Router.
  

• Test Your Router's Configuration.
  

If you have comments, send e-mail to cs-html@cisco.com.

Visit Cisco Connection Online (CCO).

Copyright 1988-1996 © Cisco Systems Inc.