|
|
ClickStart lets you configure a Cisco 1003, Cisco 1004, or Cisco 1005 router. You can also use ClickStart to monitor any Cisco router.
These pages describe how to configure a router so you can connect a small office or home PC to the Internet or another network. To configure your router using ClickStart, you do not need to learn all about networks and routers.
Configure a Cisco 1003 or Cisco 1004 ISDN Router
To configure a Cisco 1003 or Cisco 1004 ISDN router, follow these links:
Configure a Cisco 1005 Frame Relay Router
To configure a Cisco 1005 router for Frame Relay, follow these links:
Configure a Cisco 1005 Asynchronous Serial Router
To configure a Cisco 1005 router with an asynchronous serial line, follow these links:
You can also use ClickStart to monitor any router running Cisco IOS Release 11.0(6) or later, or Cisco IOS Release 11.1(2) or later.
For detailed information about how ClickStart works, read this technical information.
If you have comments, send e-mail to cs-html@cisco.com.
Visit Cisco Connection Online (CCO).
|
Copyright 1988-1996 © Cisco Systems Inc.