|
|
ClickStart Configuration Template
ClickStart configures an ISDN router with the following configuration:
service timestamps debug service timestamps log ! hostname hostname ! service password-encryption enable-secret password password line vty 0 5 password password ! isdn switch-type switch-type username remote-name password remote-password ! interface ethernet 0 ip address ip-address ip-mask ip helper-address dns-address no lat enabled no mop enabled ! interface bri 0 ip unnumbered ethernet 0 encapsulation ppp dialer map ip 192.168.254.254 name remote-name speed 56 remote-number isdn spid1 spid1 isdn spid2 spid2 ppp authentication chap dialer-group 1 ! ip classless ip route 0.0.0.0 0.0.0.0 192.168.254.254 ip route 192.168.254.254 interface bri 0 logging buffered access-list 101 deny udp any any eq snmp access-list 101 deny udp any any eq ntp access-list 101 permit ip any any snmp-server community public RO dialer-list 1 list 101 ! end
Return to ClickStart Technical Details
Return to ClickStart Home Page
|
Copyright 1988-1996 © Cisco Systems Inc.