System Specifications

The Catalyst 5000 series switch system specifications are described in Table A-1.

Table A-1 : System Specifications

Description Specifications

Backplane 1.2-Gbps¹, 5 module connections

Dimensions (H x W x D) 10.4 x 17.25 x 18.4" (26.4 x 43.1 x 46.0 cm)
Chassis depth including cable guide is 21.64" (55.0 cm)

Weight Chassis only: 43 lb (19.5 kg)
Chassis fully configured with 1 supervisor engine module, 4 switching modules,
and 2 power supplies: 84 lb (39 kg)

DC voltages supplied and steady-state maximum current ratings +5V @ 70A
+12V @ 2A
+24V @ 0.2A

Power supply 376W maximum (AC-input power supplies)

Power dissipation 350W maximum configuration, 110W typical with maximum configuration

Heat dissipation 563W (1919 Btu²/hr)

Input voltage 100--240 VAC wide input with power factor corrector

Frequency 47--63 Hz autoranging

AC current rating 8A maximum at 100--127 VAC, 4A maximum at 200--240 VAC with the chassis fully configured. A maximum of 0.8 kva.

Airflow 95 cfm³ through the system fan assembly

Operating temperature 32--104°F (0--40°C)

Nonoperating temperature -40--167°F (-40--75°C)

Humidity 10--90%, noncondensing

Microprocessor 25-MHz 68EC040 for the NMP⁴

Memory 4 MB of Flash memory
8MB of packet-buffer DRAM⁵
256 KB of NVRAM⁶

Interface ports 4 RJ-21 IEEE 802.3 Group Switching Ethernet 10BaseT (WS-X5020)
2 RJ-21 IEEE 802.3 Ethernet 10BaseT (WS-X5010)
12 ST multimode 802.3 Ethernet 10BaseFL (WS-X5011)
12 RJ-45 IEEE 802.3u Fast Ethernet 10/100 BaseTX (WS-X5213) and
100BaseTX (WS-X5113)
2 RJ-45 IEEE 802.3u Fast Ethernet 100BaseTX on supervisor engine module
2 40-pin MII⁷ IEEE 802.3u Fast Ethernet 100BaseTX MII and a
DB-25 console port for an administration workstation on supervisor engine module
(WS-C5009)
12 RJ-45 IEEE 802.3u Ethernet
12 SC multimode 802.3u Fast Ethernet 100BaseFX (WS-X5111)
1 SC ATM (WS-X5154 and WS-X5155)
1 RJ-45 ATM (WS-X5153)
2 RJ-45 A/B CDDI ports (WS-X5103)
2 ST A/B FDDI singlemode ports, ST connectors (WS-X5104) with
optical bypass switch: 6-pin mini-DIN
2 MIC A/B FDDI multimode ports, MIC connectors (WS-X5101) with
optical bypass switch: 6-pin mini-DIN

Network management SNMP⁸ agent
Station Management (SMT) Specification, Revision 7.3

Minimum Software Version Requirements for Modules Module: Flash Download:
Group Switching Ethernet Module Release 2.1 or above (10BaseT 48 Port)
ATM LAN Emulation Module (UTP) or Release 1.5 or above ATM LAN Emulation Module (Single-Mode and Multimode Fiber)
CDDI Module (UTP) Release 1.4 or above
FDDI Module MMF (Multimode Fiber) or Release 1.4 or above FDDI Module SMF (Single-Mode Fiber)

Management Information Bases (MIB) SNMP v1 (RFC 1155-1157)
SNMP MIB II (RFC 1213)
Bridge MIB (RFC 1493)
FDDI MIB, SMT 7.3 (RFC 1512)
RFC 1516 (SNMP-REPEATER-MIB)
Interface extension MIB (RFC 1573)
Ethernet (RFC 1643)
RFC 1757 (RMON MIB)
CISCO-CDP-MIB
Cisco Stack MIB
CISCO-VTP-MIB

ATM LAN Emulation Module Optical Specifications:
Single Mode Fiber

Multimode Fiber

Transmitter output power: -14 to -8 dBm
Receiver sensitivity: -32.5 to -8 dBm
Wavelength: 1261 to 1360 nm
Optical source: Laser
Maximum span: 10 km

Transmitter output power: -19 to -14 dBm
Receiver sensitivity: -32.5 to -14 dBm
Wavelength: 1270 to 1380 nm
Optical source: LED
Maximum span: 2 km

FDDI Frame processing IP Fragmentation (RFC 791)
Translation (802.1h, 802.1i)
Transparent bridging (802.1d)

Maximum
station-to-station cabling distance Fiber-optic supervisor engine module:
Multimode: 1.2 miles (2 km), full-duplex; 121 feet (400 meters), half-duplex
Single-mode: 9.3 miles (15 km), half- and full-duplex
10BaseFL, FDDI, and ATM 62.5/125-micron multimode fiber: 1.24 miles (2 km)
10BaseT Ethernet: Category 3-5 UTP¹: 328' (100 m), 100 ohn STP: 238' (100 m)
10/100BaseTX Fast Ethernet: Category 5 UTP: 328' (100 m)
100BaseTX Fast Ethernet: Category 5 UTP: 328' (100 m)
100BaseFX Fast Ethernet 62.5/125-micron multimode fiber: 0.25 miles (400 m)
half duplex
100BaseFX Fast Ethernet 62.5/125-micron multimode fiber: 1.24 miles (2 km)
full duplex
CDDI: Category 5 UTP: 328' (100 m)
FDDI and ATM: 50/125-micron multimode fiber: 1.24 miles (2 km)
FDDI: 8/125-micron single-mode fiber: 18.6 miles (32 km)
ATM UTP: Category 5 UTP: 328' (100 m)
ATM 8/125-micron single-mode fiber: 6.22 miles (10 km)

FDDI transmit power levels:
Single-mode fiber

Multimode fiber
Average optical power:
Maximum: --4.0 dBm⁹
Minimum: --7.0 dBm

Maximum: --14.0 dBm
Minimum: --18.5 dBm

FDDI receive power levels:
Single-mode fiber

Multimode fiber

Average optical sensitivity: --33 dBm
Average maximum input power: --14 dBm

Average optical sensitivity: --34 dBm
Average maximum input power: --14 dBm

Agency approvals Safety: UL¹⁰ 1950, CSA¹¹-C22.2 No. 950-93, and EN60950
EMI¹²: FCC Class A (47 CFR, Part 15),CE Mark, EN55022 Class B and VCCI Class 2 with shielded UTP cables

¹ Gbps = gigabits per second
² Btu = British thermal units
³ cfm = cubic feet per minute
⁴ NMP = network management processor
⁵ DRAM = dynamic random-access memory
⁶ NVRAM = nonvolatile random-access memory
⁷ MII = media independent interface
⁸ SNMP = Simple Network Management Protocol
⁹ dBm = decibels per milliwatt
¹⁰ UL = Underwriters Laboratory
¹¹ CSA = Canadian Standards Association
¹² EMI = electromagnetic interference

Description	Specifications
Backplane	1.2-Gbps¹, 5 module connections
Dimensions (H x W x D)	10.4 x 17.25 x 18.4" (26.4 x 43.1 x 46.0 cm) Chassis depth including cable guide is 21.64" (55.0 cm)
Weight	Chassis only: 43 lb (19.5 kg) Chassis fully configured with 1 supervisor engine module, 4 switching modules, and 2 power supplies: 84 lb (39 kg)
DC voltages supplied and steady-state maximum current ratings	+5V @ 70A +12V @ 2A +24V @ 0.2A
Power supply	376W maximum (AC-input power supplies)
Power dissipation	350W maximum configuration, 110W typical with maximum configuration
Heat dissipation	563W (1919 Btu²/hr)
Input voltage	100--240 VAC wide input with power factor corrector
Frequency	47--63 Hz autoranging
AC current rating	8A maximum at 100--127 VAC, 4A maximum at 200--240 VAC with the chassis fully configured. A maximum of 0.8 kva.
Airflow	95 cfm³ through the system fan assembly
Operating temperature	32--104°F (0--40°C)
Nonoperating temperature	-40--167°F (-40--75°C)
Humidity	10--90%, noncondensing
Microprocessor	25-MHz 68EC040 for the NMP⁴
Memory	4 MB of Flash memory 8MB of packet-buffer DRAM⁵ 256 KB of NVRAM⁶
Interface ports	4 RJ-21 IEEE 802.3 Group Switching Ethernet 10BaseT (WS-X5020) 2 RJ-21 IEEE 802.3 Ethernet 10BaseT (WS-X5010) 12 ST multimode 802.3 Ethernet 10BaseFL (WS-X5011) 12 RJ-45 IEEE 802.3u Fast Ethernet 10/100 BaseTX (WS-X5213) and 100BaseTX (WS-X5113) 2 RJ-45 IEEE 802.3u Fast Ethernet 100BaseTX on supervisor engine module 2 40-pin MII⁷ IEEE 802.3u Fast Ethernet 100BaseTX MII and a DB-25 console port for an administration workstation on supervisor engine module (WS-C5009) 12 RJ-45 IEEE 802.3u Ethernet 12 SC multimode 802.3u Fast Ethernet 100BaseFX (WS-X5111) 1 SC ATM (WS-X5154 and WS-X5155) 1 RJ-45 ATM (WS-X5153) 2 RJ-45 A/B CDDI ports (WS-X5103) 2 ST A/B FDDI singlemode ports, ST connectors (WS-X5104) with optical bypass switch: 6-pin mini-DIN 2 MIC A/B FDDI multimode ports, MIC connectors (WS-X5101) with optical bypass switch: 6-pin mini-DIN
Network management	SNMP⁸ agent Station Management (SMT) Specification, Revision 7.3
Minimum Software Version Requirements for Modules	Module: Flash Download: Group Switching Ethernet Module Release 2.1 or above (10BaseT 48 Port) ATM LAN Emulation Module (UTP) or Release 1.5 or above ATM LAN Emulation Module (Single-Mode and Multimode Fiber) CDDI Module (UTP) Release 1.4 or above FDDI Module MMF (Multimode Fiber) or Release 1.4 or above FDDI Module SMF (Single-Mode Fiber)
Management Information Bases (MIB)	SNMP v1 (RFC 1155-1157) SNMP MIB II (RFC 1213) Bridge MIB (RFC 1493) FDDI MIB, SMT 7.3 (RFC 1512) RFC 1516 (SNMP-REPEATER-MIB) Interface extension MIB (RFC 1573) Ethernet (RFC 1643) RFC 1757 (RMON MIB) CISCO-CDP-MIB Cisco Stack MIB CISCO-VTP-MIB
ATM LAN Emulation Module Optical Specifications: Single Mode Fiber Multimode Fiber	Transmitter output power: -14 to -8 dBm Receiver sensitivity: -32.5 to -8 dBm Wavelength: 1261 to 1360 nm Optical source: Laser Maximum span: 10 km Transmitter output power: -19 to -14 dBm Receiver sensitivity: -32.5 to -14 dBm Wavelength: 1270 to 1380 nm Optical source: LED Maximum span: 2 km
FDDI Frame processing	IP Fragmentation (RFC 791) Translation (802.1h, 802.1i) Transparent bridging (802.1d)
Maximum station-to-station cabling distance	Fiber-optic supervisor engine module: Multimode: 1.2 miles (2 km), full-duplex; 121 feet (400 meters), half-duplex Single-mode: 9.3 miles (15 km), half- and full-duplex 10BaseFL, FDDI, and ATM 62.5/125-micron multimode fiber: 1.24 miles (2 km) 10BaseT Ethernet: Category 3-5 UTP¹: 328' (100 m), 100 ohn STP: 238' (100 m) 10/100BaseTX Fast Ethernet: Category 5 UTP: 328' (100 m) 100BaseTX Fast Ethernet: Category 5 UTP: 328' (100 m) 100BaseFX Fast Ethernet 62.5/125-micron multimode fiber: 0.25 miles (400 m) half duplex 100BaseFX Fast Ethernet 62.5/125-micron multimode fiber: 1.24 miles (2 km) full duplex CDDI: Category 5 UTP: 328' (100 m) FDDI and ATM: 50/125-micron multimode fiber: 1.24 miles (2 km) FDDI: 8/125-micron single-mode fiber: 18.6 miles (32 km) ATM UTP: Category 5 UTP: 328' (100 m) ATM 8/125-micron single-mode fiber: 6.22 miles (10 km)
FDDI transmit power levels: Single-mode fiber Multimode fiber	Average optical power: Maximum: --4.0 dBm⁹ Minimum: --7.0 dBm Maximum: --14.0 dBm Minimum: --18.5 dBm
FDDI receive power levels: Single-mode fiber Multimode fiber	Average optical sensitivity: --33 dBm Average maximum input power: --14 dBm Average optical sensitivity: --34 dBm Average maximum input power: --14 dBm
Agency approvals	Safety: UL¹⁰ 1950, CSA¹¹-C22.2 No. 950-93, and EN60950 EMI¹²: FCC Class A (47 CFR, Part 15),CE Mark, EN55022 Class B and VCCI Class 2 with shielded UTP cables

Table of Contents

System Specifications

System Specifications