|
|
The FastHub 112F LEDs facilitate troubleshooting during ongoing operation. Table 4-1 displays the potential problem symptoms, possible causes, and corrective actions.
| Symptom | Possible Cause | Corrective Action(s) |
|---|---|---|
| Power LED does not come on | Power switch off | Turn on switch |
| Power cord not connected | Plug in both ends of power cord | |
| Fuse blown | Replace fuse. If the problem recurs, contact Cisco or your authorized reseller | |
| Other | Contact Cisco or your authorized reseller | |
| Link LED does not come on | No cable inserted | Insert both ends of cable into a device |
| Device(s) not powered | Ensure both devices have power | |
| Bad cable | Replace cable with known good one | |
| Disabled LED blinks | Device at other end malfunctioning | Investigate device at other end of cable from the disabled FastHub 112F port |
| Bad cable | Replace cable with known good one |
|
Copyright 1988-1996 © Cisco Systems Inc.