|
|
This appendix contains technical specifications for the following Cisco Access Server 5100 components:
Table A-1 Chassis and Power Supply Specifications
| Specification | Description |
|---|---|
| Access Server 5100 chassis capacity | Up to 17 front-loaded NACs, and their associated rear-loaded NICs. Two power supplies (both are required) |
| Certification | Complies with FCC Part 15 Class A EMI/RFI requirements; complies with FCC Part 68 for nationwide telephone systems; listed by Underwriters' Laboratories (UL), approved by the Canadian Standards Association (CSA), and is Department of Communications (DOC) certified |
| Power requirements | DC power supply nominal --48 VDC (--42 VDC to --60 VDC) with respect to ground AC power supply nominal 120 V (90--132 VAC) @ 47--63 Hz, or strap-selectable nominal 240 V (180--264 VAC)@ 47--63 Hz |
| Power supply output (maximum) | 330 W45A @ +5.2V2A @ --5 V3.5A @ +12.2V3.5A @ --12.2V |
| Power supply input (maximum) |
470W1604 Btus4A (DC)10A (DC) |
| Operating environment | Temperature: 32--104oF (0--40oC)Relative humidity: 0--95% noncondensing |
Table A-2 AS51 NAC and NIC
| Specification | Description |
|---|---|
| Power requirements(maximum) | 4A @ +5 VDC, 6.75W55 mA @ --5 VDC, 275 mW50 mA @ +12 VDC, 600 mW50 mA @ 12 VDC, 600 mW |
| Operating environment | Temperature: 32--104oF (0--40o)Relative humidity: 0--95% noncondensing |
| Dimensions (L x H) | NAC: 12.45 x 6.4" (31.62 x 16.26 cm)NIC: 4.85 x 6.4" (12.32 x 16.26 cm) |
| Certification | Complies with FCC Part 15, UL-listed, CSA-approved |
Table A-3 Quad Modem NAC and NIC
| Specification | Description |
|---|---|
| Power requirements(maximum) | 1.35A @ +5 VDC, 6.75W55 mA @ --5 VDC, 275 mW50 mA @ +12 VDC, 600 mW50 mA @ 12 VDC, 600 mW |
| Operating environment | Temperature: 32--104oF (0--40oC)Relative humidity: 0--95% noncondensing |
| Dimensions (L x H) | NAC: 12.45 x 6.4" (31.62 x 16.26 cm)NIC: 4.85 x 6.4" (12.32 x 16.26 cm) |
| Certification | Complies with FCC Part 15, UL-listed, CSA-approved |
| Receive sensitivity | --44 dBm +2 dBm |
| Transmit level | --9 dBm maximum |
| Transmitter frequency tolerance | .01% |
Table A-4 T1 NAC and NIC
| Specification | Description |
|---|---|
| Power requirements | 1.5A @ 5 VDC0.1 A @ 12 VDC5W |
| Dimensions (L x H) | NAC: 12.45 x 6.4" (31.62 x 16.26cm)NIC: 4.85 x 6.4" (12.32 x 16.26 cm) |
| Heat | 17 Btus |
| Operating environment | Temperature: 32--104oF (0--40oC)Relative humidity: 0--95% noncondensing |
Table A-5 Network Management NAC
| Specification | Description |
|---|---|
| Power requirements (maximum) | 3.5A @ +5 VDC20 mA @ --5 VDC50 mA @ +12 VDC50 mA @ --12 VDC |
| Operating environment | Temperature: 32--104oF (0--40oC)Relative humidity: 0--95% noncondensing |
| Dimensions (L x H) | 12.45 x 6.4" (31.62 x 16.26 cm) |
| Certification | Complies with FCC Part 15 Class A, FCC Part 68, UL-listed, CSA-approved, and DOC-certified |
Table A-6 Network Management Ethernet NIC
| Specification | Description |
|---|---|
| Power requirements | 1.5A @ +5 VDC50 mA @ +12 VDC50 mA @ --12 VDC |
| Operating environment | Temperature: 32--104oF (0--40oC)Relative humidity: 0--95% noncondensing |
| Dimensions (L x H) | 4.85 x 6.4" (12.32 x 16.26 cm) |
| Certification | Complies with FCC Part 15 Class A, FCC Part 68, UL-listed, CSA-approved, and DOC-certified |
|
Copyright 1988-1995 © Cisco Systems Inc.