Table of Contents

Troubleshooting CiscoWorks Errors

Running CiscoWorks Applications from the Command Line

Troubleshooting CiscoWorks Errors

This appendix contains the following section:

• Running CiscoWorks Applications from the Command Line
  

Running CiscoWorks Applications from the Command Line

You can run CiscoWorks from a supported graphical user interface or from the UNIX command line. If you experience problems using the graphical user interface, you might prefer to use the command line to bring up the applications. This section describes the command line syntax used to bring up all the CiscoWorks applications.

To start CiscoWorks applications from the command line, perform the following steps:

Step 1 To change directories to access the CiscoWorks applications, commands, or daemons, enter the following command:

% cd $NMSROOT/bin        

The files can be located in either $NMSROOT/bin or $NMSROOT/etc.

Step 2 To start any CiscoWorks application, command, or daemon, enter the appropriate command from the following list:

• dwb---Sybase Data Workbench (DWB) application
  

To alter your terminal environment variable, refer to the section "Invoking Sybase DWB from the Command Line" in Chapter 4 of theCiscoWorks User Guide.

• flrxboot_upgrade---Flash Boot Upgrade script
  

expectk -f flrxboot_upgrade device:device ip_address:address linepw:passwd enablepw:passwd tftpdir:/tftpboot tftpserver:address

• logpurg---Log Purge program
  

• nmadd [-v][-h][-n device][-d domain_name] [-r commstring][ -w rw_commstring]---Add to database application
  

• nmadmin---Security Manager application
  

• nmconfig [-v][-h][-d device][-U user][-P password][-O option][-D group][-m maillist][-l logdir][-c commandfile][-s community string][-g group][-dom domain]--- Configuration Management Batch Program
  

• nmconfman---Configuration Management application
  

• nmcontacts---Contacts application
  

• nmdevman [-v]---Device Management application
  

• nmdevswman---Device Software Manager application
  

• nmdomain [-v][-h ][-G domain]---Domain Manager application
  

• nmenv [-v] device community string---Environmental Monitor application (needs envmonitor 2.0 or later)
  

• nmgcmd [-v][-h][-G domain]---Global Command Manager application
  

• nminventory---Software Device Inventory application
  

• nmlogin---Login application
  

• nmlogman---Log Manager application
  

• nmlogout---Logout application
  

• nmpccmd [-v]---Configuration Snap-In Manager application
  

• nmpath [-v] [-D] [source] [destination]---Path Tool application
  

• nmpoll---Device Polling application
  

• nmproc---Process Manager application
  

• nmsanms---Default Account program
  

• nmscheduler [-U cw_user_name][-N my_global_cmd]---Global Commands Scheduler
  

• nmshow [ -v ] device community_string [option]---Show Commands application
  

• nmsummary---Polling Summary application
  

• nmswman---Software Library Manager application
  

• nmsync [-v][-l][-D domain_name][-h host_name]---Sync w/Sybase application
  

• nmtacacs---TACACS Manager application
  

• nmversion---Version Command
  

For example, to start the Contacts application, enter the following:

% nmcontacts        

The Contacts window will appear.

---

Note If you experience difficulty with a CiscoWorks application, contact a technical support

---

Copyright 1988-1995 © Cisco Systems Inc.