Table of Contents
About This Guide
About This Guide
This section discusses the objectives, audience, organization, and conventions of the Cisco IPeXchange Monitor User Guide.
Cisco documentation and additional literature are available on a CD called Cisco Connection Documentation, Enterprise Series. The CD is updated and shipped monthly so it might be more current than printed documentation. To order the Cisco Connection Documentation, Enterprise Series CD, contact your local sales representative or call Customer Service. The CD is available both as a single CD and as an annual subscription. You can also access Cisco technical documentation on the World Wide Web URL http://www. cisco.com.
Document Objectives
This publication introduces the Cisco IPeXchange Monitor software and describes its operation. The software is installed along with the Cisco IPeXchange Internet Gateway software (previously called the Cisco Internet Junction Gateway), so installation instructions are not provided in this publication.
Audience
This publication is for the network manager, who should be familiar with IPX and TCP/IP networks, Novell NetWare, and HTML web browsers.
Document Organization
The major sections of this guide are as follows:
- Chapter 1, "Overview of the Cisco IPeXchange Monitor," describes the features of the monitor.
- Chapter 2, "Starting and Exiting the Cisco IPeXchange Monitor," describes system requirements and how to run the monitor.
- Chapter 3, "Tutorial," describes the main tasks for using the monitor.
- Chapter 4, "Controlling Internet Access," describes how to compile user and group lists and control access to TCP/IP services.
- Chapter 5, "Monitoring Connections," describes how to look at snapshots of connections through the gateway.
- Chapter 6, "Tracing the Cisco IPeXchange Gateway," describes how to start and stop logging for troubleshooting the gateway.
- Appendix A, "Troubleshooting the Cisco IPeXchange Monitor," describes what to do if you have problems using the monitor.
Document Conventions
This guide uses the following conventions to convey instructions and information.
Command descriptions use these conventions:
- Commands and keywords are in boldface font.
- Variables for which you supply values are in italic font.
- Elements in square brackets ([ ]) are optional.
- Alternative but required keywords are grouped in braces ({ }) and are separated by a vertical bar ( | ).
Samples use these conventions:
- Terminal sessions are printed in
screen
font.
- Information you enter is in
boldface screen
font.
- Nonprinting characters are shown in angle brackets (< >).
- Information the system displays is in
screen
font, with default responses in square brackets ([ ]).
The following conventions are used to highlight important material:
Note Means reader take note. Notes contain helpful suggestions or references to materials not covered in the manual.
Timesaver Means the described action saves time. You can save time by performing the actions described in the paragraph.
Caution Means reader be careful. In this situation, you might do something that could result in equipment damage or loss of data.
Warning This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, you must be aware of the hazards involved with electrical circuitry and familiar with standard practices for preventing accidents.
Copyright 1988-1996 © Cisco Systems Inc.
