Table of Contents

Verify the TCP/IP Configuration on a Windows 3.11 PC

Verify the TCP/IP Configuration on a Windows 3.11 PC

To verify the Transmission Control Protocol/Internet Protocol (TCP/IP) configuration on a PC running Windows 3.11, perform the following tasks:

1. Check that the PC has the correct IP address.
   

2. Load the ClickStart Install Program for Windows disk in your PC and follow the instruction contained on the ClickStart for Cisco 700 Series Routers quick reference card included in your router package.
   

3. When you have configured the router, set the default gateway to the router's IP address.
   

If you change any of these parameters from previous settings, you must either exit all the TCP/IP applications and restart them, or restart your PC.

Return to ClickStart Home Page

Copyright 1988-1996 © Cisco Systems Inc.