ClickStart Configuration Template

ClickStart configures the router with the following configuration:
CD 
SET SCREENLENGTH 20 
SET COUNTRYGROUP 1 
SET LAN MODE ANY 
SET WAN MODE ONLY 
SET AGE OFF 
SET MULTIDESTINATION OFF 
SET SWITCH 5ESS 
SET 1 SPID 044100 
SET 1 DIRECTORYNUMBER 0441 
SET 2 SPID 044200 
SET 2 DIRECTORYNUMBER 0442 
SET 1 DELAY 30 
SET 2 DELAY 30 
SET BRIDGING ON 
SET LEARN ON 
SET PASSTHRU OFF 
SET ENCAPSULATION CPP 
SET SPEED AUTO 
SET PLAN NORMAL 
SET 1 AUTO ON 
SET 2 AUTO ON 
SET 1 NUMBER  
SET 2 NUMBER  
SET 1 RINGBACK  
SET 2 RINGBACK  
SET SYSTEMNAME cpa760 
LOG CALLS TIME VERBOSE 
SET UNICASTFILTER OFF 
DEMAND 1 THRESHOLD 0 
DEMAND 2 THRESHOLD 48 
DEMAND 1 DURATION 1 
DEMAND 2 DURATION 1 
DEMAND 1 SOURCE LAN 
DEMAND 2 SOURCE BOTH 
TIMEOUT 1 THRESHOLD 0 
TIMEOUT 2 THRESHOLD 48 
TIMEOUT 1 DURATION 0 
TIMEOUT 2 DURATION 0 
TIMEOUT 1 SOURCE LAN 
TIMEOUT 2 SOURCE BOTH 
SET REMOTEACCESS PROTECTED 
SET LOCALACCESS ON 
SET LOGOUT 5 
SET CALLERID OFF 
SET PPP AUTHENTICATION IN CHAP 

SET CALLBACKID OFF 
SET CALLBACK OFF 
SET PPP AUTHENTICATION OUT CHAP   
SET PPP CALLBACK REQUEST OFF 
SE PPP CALLBACK REPLY OFF 
SET CPP NEGOTIATION INTEGRITY 10 
SET CPP NEGOTIATION ABORT DISCONNECT 
SET CPP NEGOTIATION COUNT 6 
SET CPP NEGOTIATION RETRY 1000 
SET PPP NEGOTIATION INTEGRITY 10 
SET PPP NEGOTIATION COUNT 10 
SET PPP NEGOTIATION RETRY  3000 
SET PPP TERMREQ COUNT 2 
SET PPP MULTILINK ON 
SET COMPRESSION STAC 
SET CPP PROTOCOL ORDERED 
SET SNMP CONTACT  
SET SNMP LOCATION  
SET SNMP TRAP COLDSTART OFF 
SET SNMP TRAP WARMSTART OFF 
SET SNMP TRAP LINKDOWN OFF 
SET SNMP TRAP LINKUP OFF 
SET SNMP TRAP AUTHENTICATIONFAIL OFF 
SET VOICEPRIORITY INCOMING INTERFACE PHONE1 CONDITIONAL 
SET VOICEPRIORITY OUTGOING INTERFACE PHONE1 ALWAYS 
SET CALLWAITING INTERFACE PHONE1 OFF 
SET VOICEPRIORITY INCOMING INTERFACE PHONE2 CONDITIONAL 
SET VOICEPRIORITY OUTGOING INTERFACE PHONE2 ALWAYS 
SET CALLWAITING INTERFACE PHONE2 OFF 
SET USER LAN 
SET IP ROUTING ON 
SET IP ADDRESS 192.168.99.219 
SET IP NETMASK 255.255.255.0 
SET IP RIP UPDATE PER 
SET USER Internal 
SET USER Standard 
SET PROFILE POWERUP ACTIVATE 
SET PROFILE DISCONNECT KEEP 
SET USER ev-2060 
SET PROFILE ID 000000000000 
SET PROFILE POWERUP ACTIVATE 
SET PROFILE DISCONNECT KEEP 
SET ENCAPSULATION PPP 
SET 1 NUMBER 0451 
SET 2 NUMBER 0452 
SET IP ADDRESS 0.0.0.0 
SET IP FRAMING NONE 
SET IP RIP UPDATE PER 
SET IP ROUTING ON
Return to ClickStart Technical Details
Return to ClickStart Home Page
Table of Contents

ClickStart Configuration Template

ClickStart Configuration Template
