Router Setup Example Forms

Router Frame Relay EZSetup

Note This is a sample form only. Do not use this form to configure your router. When you are ready to configure your router, return to Configure the Router and select the hotlink click here.

Router Frame Relay EZSetup

To configure your router, fill in the following fields. You should have received most of this information from your network manager or service provider.

Router Name and Password

Name your router and give it a password. The router name must be the name that you were told to use. The password is your choice.

Router name
Router password
Verify password

Frame Relay Setup

Frame Relay IP address
Frame Relay netmask
Frame Relay DLCI

IP Addresses

Router IP address
Router netmask
DNS server IP address

Diagnostic Information

You can enable debugging. This has little or no impact on performance but will help diagnose problems. Debugging information is sent to the console and is stored in an internal buffer.

Please choose one of the options below.

Enable standard debugging
Disable debugging

Return to Configure the Router.

Return to ClickStart Home Page.

Table of Contents